Performance & consumption analytics
Find the hours your arcs aren't burning.
WeldCloud Productivity turns machine data into arc time, fusion rate, wire, gas and energy figures you can act on — per welder, per machine, per site, in real time.
30 days free · No credit card required
The numbers behind every arc.
Data comes straight off the power source — no manual logging, no estimates. Slice it by machine, welder, station, shift or assembly.
See how much of a shift is actually spent welding, where the idle hours sit, and which stations are carrying the load.
Deposition and consumable spend per job, so quoting is based on what the shop really uses rather than a rule of thumb.
Put a price on wire, gas and energy and every hour of arc time carries a real cost — per machine, per job, per site.
Set a target per site or station and watch progress against it — no spreadsheet in the middle.
Build the view you need once, schedule it, and have it land in the right inbox every Monday.
Compare plants on the same metrics, with each site keeping its own detailed view.
See the floor as it welds
A live board of every connected machine — welding, idle or offline — with the current job and operator. Supervisors stop walking the shop to find out where the bottleneck is.
- ✓ Machine state updated in seconds
- ✓ Idle-time alerts by station or cell
- ✓ Works on a shop-floor screen or a phone
The weekly report writes itself
Choose the metrics, the grouping and the period once. Productivity assembles the report on schedule and sends it as PDF or exports the raw rows for your own analysis.
- ✓ Scheduled PDF and CSV delivery
- ✓ Group by welder, machine, station or assembly
- ✓ API access for your BI stack
Prove the change actually worked
Set a baseline before a process change, then compare the same period after. Arc time, consumables and energy side by side — the payback on a new torch or a re-layout stops being a guess.
- ✓ Period-over-period comparison
- ✓ Cost per metre of weld
- ✓ Energy figures for sustainability reporting
Numbers with context, not just charts.
Productivity reads the same fleet, procedures and assemblies as the rest of WeldCloud, so every measurement knows what it was measuring.
NotesWelders and procedures registered in Notes label the data here, so figures are reported per qualified welder and job.
FleetMachines, stations and sites are defined once in Fleet and reported on here without re-registering anything.
AssemblyReport productivity per assembly or part number, not just per machine — cost per unit, straight from the arc.
Start measuring what the shop actually does.
Connect one machine and you'll have a week of real arc data before your next production meeting.
Start free trial30 days · No credit card · Cancel anytime